Industrial Instrumentation and Control Systems Engineer
This know-how belongs to our “Engineering & architecture” expertise (plans, technical drawing, BIM modelling and project follow-up). It is carried out by a salaried Good-ID employee, supervised by our project managers. Backed by 4 years of experience, the service is delivered in French (B2) and English (B2). Remote delivery under a service contract with Good-ID Sàrl: we remain the employer, the supervisor and your single point of contract.
Role and background
I am an industrial electronics engineer specializing in instrumentation and process control systems, with nearly 4 years of hands-on experience. I am proficient in programming Siemens (S7-300/400, S7-1500) and Rockwell PLCs, configuring industrial networks, and performing preventive and corrective maintenance on instrumentation and control equipment. I have participated in projects involving the commissioning, start-up, and optimization of DCS and automated systems aimed at improving the efficiency and safety of industrial operations. I am detail-oriented and self-motivated, and I am constantly seeking new opportunities to apply and further develop my skills in this field.
Professional Experience
Instrumentation and Process Control Systems Technician
Since November 2024 • Rio Tinto QMM • Madagascar
I program and maintain Siemens S7-1500 and Rockwell PLCs, ensuring the reliability of process control systems. I configure network equipment such as switches and routers, as well as calibrate instrumentation, to optimize operational performance. I perform diagnostics and troubleshooting for electrical and network communication issues, which helps reduce downtime. I also participate in the startup and commissioning of PowerFlex variable-speed drives, thereby improving the efficiency of mining facilities.
Technical Engineer
August 2024–November 2024 • Taf Madagascar • Madagascar
I assembled and wired electrical cabinets and control circuits, ensuring compliance with technical schematics. I worked on electrical and electromechanical systems to troubleshoot issues, thereby ensuring uninterrupted service. I also handled the installation and diagnostics of electric motors, contributing to the reliability of the equipment.
DCS (Distributed Control System) Technician, EI & C Department
March 2023–March 2024 • Sherritt International, Ambatovy Plant, Toamasina • Madagascar
I programmed and troubleshot Siemens S7-300/400 PLCs for the distributed control system, including MOC management and simulation testing. I performed preventive and corrective maintenance on DCS instrumentation and equipment, as well as the installation and configuration of network equipment such as Scalance and PLCs. I actively participated in the commissioning, loop check, and start-up phases, ensuring optimal parameterization of the PLCs. I helped install and network client HMIs, servers, and engineering workstations, while keeping the technical documentation and system architecture up to date. I also migrated and upgraded HMI screens and installed temperature monitoring panels in the substations. Finally, I implemented PROFIHUBs in the MCCs to improve communication efficiency and reduce errors.
Network and System Administration Intern
October 2022–March 2023 • RAVINALA Airports • Madagascar
I actively participated in the preventive and corrective maintenance of network and system infrastructure, ensuring the availability of critical services in a demanding airport environment. I helped resolve Level 1 and 2 technical incidents, optimizing team responsiveness and operational continuity. I assisted with the configuration and deployment of new equipment, ensuring the seamless integration of technological solutions. I also documented technical procedures and configurations, which helped improve knowledge management and internal training.
Degrees
Industrial Electronics Engineer
2022 • École Supérieure Polytechnique d’Antananarivo
Additional Training
CCP154-EL Studio 5000 Logix Designer Level 4
2025 • Structured Text/Sequential Function Chart Programming
DRV101-EL TotalFORCE Fundamentals for PowerFlex 755TS, 755TR, 755TL, and 755TM Drives
2025
CCP143 Studio 5000 Logix Designer Level 3
2025 • Project Development
PRC201-EL PlantPAx System Design and Configuration
2025
CCP153: Studio 5000 Logix Designer Level 2
2025 • ControlLogix Maintenance and Troubleshooting
CCCL21 Studio 5000 Logix Designer Level 3
2025 • Basic Ladder Logic Interpretation
SIMATIC Programming Training
2024 • 1 TIA-PRO 1
First Aid Training
2024 • International SOS
SINE CNMS Profinet Training
2023 • Siemens
Risk Analysis Training
2023 • ISO 9001 and 14001
ATEX Work Authorization
2023 • Ineris
At a glance
- Field of expertise
- Engineering & architecture
- Experience
- 4 years of experience
- Working languages
- Tools and software in use
- Markets covered
Outsource work in this field
Describe what you need: we build the team, we supervise it, and we answer for the work delivered. Good-ID remains the employer and your single point of contract.
Related skills in this field
Other know-how practised by our salaried employees within our “Engineering & architecture” expertise, supervised by Good-ID in the same way.
- Expert Engineer in Electrical Engineering & Industrial AutomationFrench C1 · English B2 · Ref. 10149
- Electromechanical Engineer and Industrial Automation EngineerFrench C1 · English C1 · Ref. 10152
- Industrial Mechanical EngineerFrench C1 · English B2 · Ref. 10082
- Steel Structures & Industrial Maintenance EngineerFrench C2 · English B2 · Ref. 10118
- Industrial Automation EngineerFrench C1 · English B2 · Ref. 10161
- Industrial Maintenance & Technical Project Management Engineer (Electromechanical, HVAC…French C1 · English C1 · Ref. 10247
- Civil Engineer | BIM & CAD | Planning & DesignFrench C1 · English B2 · Ref. 10312
- Civil EngineerFrench B2 · English B2 · Ref. 10306
Anonymised record: no name, no contact details and no data allowing the person to be identified are published. Published for commercial purposes under the responsibility of Good-ID Sàrl, Geneva.